Diagnosis and troubleshooting of cable and/or equipment issues in the subscriber's apartment. If the issue is found outside the apartment, the service call is free!

Master's call

inext TV5 - медиаплеер с операционной системой Android 10, новым мощным чипсетом Allwinner H313, двухдиапазонным модулем WiFi 2.4/5 GHz и возможностью просмотра видео контента в формате 4K UHD.  Объем встроенной памяти составляет 8 ГБ, а оперативной памяти - 1 ГБ (DDR3). Устройство создано для комфортного просмотра  видео-, фото- и аудио контента, имеет богатый функционал и широкие возможности для подключения.

iNeXT TV5 Media Player

Power supply for inext TV5 and inext TV5 Ultra.

Key Features:

Input: 110-240V AC, 50/60Hz 0.3A
Output: 5V DC 2A

Power supply for inext TV5

Compatible with inext TV5 and inext TV5 Ultra, as well as all Ozone media players.
Brand: inext.



AV Cable for inext TV5/TV5 Ultra

The universal remote control with a programming mode is compatible with inext TV5, TV5 Ultra, TV4, 4K Ultra, TV2e, TV3, and 4K2.

Button Programming for TV Control

To enter programming mode, press and hold the white "POWER" button in the "TV REMOTE" section for about 5 seconds until the indicator stops blinking and stays solid red.

Select a button in the "TV REMOTE" section on the inext remote that you want to program. Press and release it once—the indicator will start blinking, meaning the remote is ready to receive an IR signal.

Point the IR diodes of the two remotes (the TV remote and the inext remote) at each other at a distance of about 1-2 cm. Press the desired button on the TV remote once. If the command is received, the indicator on the inext remote will blink three times quickly and then stay solid, confirming that the command has been recorded.

Repeat steps 2-3 for all buttons you want to program.

If you have finished recording commands and want to exit programming mode, press the "OK" button in the center of the remote control.

Universal remote control for inext TV5 with Programming Mode

Universal remote control with programming zone for inext TV5, TV5 Ultra, TV4, 4K Ultra, TV2e, TV3, 4K2.

Programming buttons for TV control
    1. Entering the remote programming mode is done by pressing the «POWER»  button in the «TV» section. Hold down the «POWER» button (approx 5 sec) until the indicator stops blinking and start burn continuously.
    2. Select one of those buttons in the «TV» section on the inext remote control to which you want to record a command, press it once and release, the indicator will flash, now the remote control is ready to receive the IR signal for recording.
    3. Pointing at each other the IR diodes of the two remotes (from the TV and from the inext) at a distance of about 1-2 cm, press the desired button on the TV remote control, the function of which you want to transfer.  If the command has been accepted, the indicator will blink three times and start to burn continuously, which means that the command has been recorded.
    4.  Repeat steps 2-3 for all buttons you wish to program.
    5. If you have written down all the commands and want to exit the programming mode, press the button «OK» in the center of the remote control.

Universal remote control V2.0 for inext TV5

Universal remote control with a programming mode compatible with inext TV5, TV5 Ultra, TV4, 4K Ultra, TV2e, TV3, and 4K2.

Button Programming for TV Control

To enter programming mode, press and hold the "POWER" button in the "TV" section for about 5 seconds until the indicator stops blinking and remains steadily lit.
Select a button in the "TV" section on the inext remote that you want to program. Press and release it once—the indicator will start blinking, meaning the remote is ready to receive an IR signal.
Point the IR diodes of both remotes (the TV remote and the inext remote) at each other at a distance of about 1-2 cm. Press the desired button on the TV remote once. If the command is received, the indicator on the inext remote will blink three times quickly and then stay solid, confirming that the command has been recorded.
Repeat steps 2-3 for all buttons you want to program.
If you have finished recording commands and want to exit programming mode, press the "OK" button in the center of the remote control.

Universal remote control V3.0 for inext TV5

To connect, you need to contact our managers at (044) 300-13-00.

To be able to watch TV, you will need a stable internet connection and to install the SWEET TV app on your television. 
If your TV doesn't have the capability to install apps, you will need to connect an Android set-top box, such as the iNeXT TV5, that allows the installation of the SWEET TV app.







What is needed to connect TV?

We provide television from the online cinema SWEET TV using the OTT technology.








What television services does your company provide?

This can happen for various reasons, the most common ones include:

**- Low Internet Speed:**
For the proper functioning of OTT television, a stable internet connection is necessary. We recommend connecting your TV/device to the router using an Ethernet cable. If you choose to connect via Wi-Fi, ensure the router is positioned with minimal distance and obstacles for signal transmission. It is also recommended to use a network in the 5GHz range.

**- Equipment Lag:**
Restart your TV/device and your router by unplugging them.

If this doesn't help, you need to contact technical support at (044) 300-11-00.

Television

99

159

129

Additional services

Additional services

Recommended equipment

Recommended equipment

FAQ

What is needed to connect TV?

What television services does your company provide?

What to do if the channels are freezing or buffering during viewing?