Universal remote control with a programming mode compatible with inext TV5, TV5 Ultra, TV4, 4K Ultra, TV2e, TV3, and 4K2.
Button Programming for TV Control
To enter programming mode, press and hold the "POWER" button in the "TV" section for about 5 seconds until the indicator stops blinking and remains steadily lit.
Select a button in the "TV" section on the inext remote that you want to program. Press and release it once—the indicator will start blinking, meaning the remote is ready to receive an IR signal.
Point the IR diodes of both remotes (the TV remote and the inext remote) at each other at a distance of about 1-2 cm. Press the desired button on the TV remote once. If the command is received, the indicator on the inext remote will blink three times quickly and then stay solid, confirming that the command has been recorded.
Repeat steps 2-3 for all buttons you want to program.
If you have finished recording commands and want to exit programming mode, press the "OK" button in the center of the remote control.